You may change scents at no charge – we simply ask that you provide 45 days advance notice to arrange for the switchover.
Author Archives: brandon.orndorff
My Machine Isn’t Working
First make sure that your AC adapter is plugged into a functioning electrical outlet and that the machine is turned on.
Also ensure that your cartridge or oil container is plugged in correctly.
For device-specific troubleshooting, refer to the manual for your scent device or return to the Hub homepage to select your device.
The scent is too strong
If you find the scent in your location seems too strong, you may want to troubleshoot machine settings/machine placement prior to deciding to change your scent altogether.
- The machine may be on “full-blast” – refer to the quick troubleshooting guide provided with your scent device to ensure you are getting a “middle of the road” delivery. Or, you can lower the settings to lowest levels if necessary.
- Ensure that the machine is not directed at a person – the scent should be dispersed to a general area, not in a direct, targeted fashion.
- The strength of scent varies by fragrance. If the scent is still too strong for you or your employees, we can offer lighter scents (generally in the Ozone/Marine/Fresh/Clean category) that can work just as effectively for your business.
I can’t smell our scent
Make sure your scent cartridge or oil container still has sufficient charge, and that your device is placed correctly according to the user manual. For more information on correct device placement, return to the Hub homepage and select your scent device.
Have you had your scent for a long time? Over time, those receiving the same scent for several months can suffer from Olfactory Fatigue, which is essentially becoming used to the scent. Like any scent, you can become acclimated to a scent you encounter on a daily basis. For example, think of visiting someone’s home –to them it smells normal, but you will smell various fragrances in their home (good or bad). The same applies to ScentAir. While you may not smell it, guests/residents/customers will smell the fragrance.
The term “anosmia” is used to describe the point at which a person disregards an aroma. Depending upon the fragrance and its strength, in environmental scenting this can occur between one and three minutes of constant interaction with the scent.
I want to change the program that is currently playing
On your device, press ENTER to access the Select Zone menu – the current zone name is displayed. Select a zone using UP or DOWN. Press ENTER to confirm zone selection. The name of the current program is displayed. Browse through your available programs using UP or DOWN. Press ENTER to confirm your selection.
My device is not playing music
Verify that:
- The device has power. If it does, turn the device off and back on
- RCA audio cable is properly plugged into the receiver and the amplifier
- The amplifier is turned on and volume knobs are set to the correct positions
- The volume of wall-mounted volume controls (if present) is set at an appropriate level
For additional troubleshooting, contact Mood Client Support.
ディスクアップデートに10分以上かかる
20分ほど待った後も完了しなかった場合は、再起動を以下の方法で行う:
- STANDBYボタンを押し、Standby Modeへ
- 再びSTANDBYボタンを押して、本体の電源を切る
- プレーヤー背面の電源ケーブル横にある電源ON/OFFボタンを押してOFF
- 電源ケーブルを壁のコンセントまたはプレーヤー側から外し、30秒ほど置く
- 電源ケーブルを差し直す
- プレーヤー背面の電源ON/OFFボタンを押してON
- すぐにディスクを取り出す
音楽が流れ出したら、再びディスクアップデートを試す。解決しない場合はサービスコールへ
ディスクアップデートがうまくいかない・ディスクが読み込まれずすぐに出てくる
解決方法:
アップデートディスクをDVDドライブに挿入すると、アップデート中はDVDドライブの緑のランプが時々点滅します。アップデートが完了すると、ディスクは自動的に排出されます。アップデートには1~60分かかります。
以下の確認を行う:
1. ディスクに傷や指紋などが付いていないか
※ディスクをクリーニングする際は、糸くずの出ない綿の布を使い、ディスクの中央から外側に向かって拭いてください。円を描くように拭くとキズがつくことがありますのでご注意ください。”
2. ディスクトレーに正しい位置でディスクを入れているか
※ディスク表面(文字が記載されている面)を上にして、トレイの中央に挿入、 トレイを戻してください。
ディスクがすぐに出てきてしまう場合は、繰り返し挿入を試す。解決しない場合はサービスコールへ
Display continually scrolls through the title and artist information, but there is no music playing
Reboot the device using the following steps:
- Press STANDBY and allow the device to go into Standby Mode
- Press STANDBY again and allow the device to power down
- Press the power button on the back of the device
- Unplug the power cord and leave the device unplugged for 30 seconds
- Plug the power cord back in and press the power button
- Press STANDBY once – the device will initialize and return to music playback
ディスプレイ画面に“Music Stopped.”の表示
以下の方法で、プレーヤーの日付が合っているか確認:
- 音楽が流れている状態で(*)ボタン を押す
- ↓で下に行き、”Set Date and Time”に合わせて (*)ボタン
- 各項目を “↑↓→”で変更し、正しい時間に合わせて(*)ボタン
解決しない場合はサービスコールへ